SES 10 is listed in the DishTuner satellite database at 67.0°W. This page summarizes the available satellite channels, representative frequencies, coverage information, languages and tuning notes so viewers can understand what to expect before adjusting a dish or scanning a receiver.
SES 10 Satellite Overview
| Satellite Name | SES 10 |
|---|---|
| Orbital Position | 67.0°W |
| Coverage Regions | Europe, South America, North America |
| Total Channels in Database | 1 |
| Total Transponders in Database | 9 |
| Free-to-Air Channel Rows | 1 |
| Encrypted Channel Rows | 0 |
| Main Languages | Por |
Coverage Area of SES 10
DishTuner currently groups SES 10 with these coverage regions: Europe, South America, North America. Actual reception can vary by beam, dish size, weather, cable quality and local horizon clearance. Use this coverage information as a practical starting point, then confirm the available signal from your own location.
Regions Covered
The main region labels for SES 10 are Europe, South America, North America. These labels describe the database coverage grouping, while real reception still depends on the active beam and local installation conditions.
Countries Covered
The channel data associated with SES 10 includes country links such as Brazil. Some services may still be beam-specific or encrypted, so the receiver scan in your area may show fewer or different services than a complete database list.
Channels Available on SES 10
DishTuner currently lists 1 unique channels connected to SES 10. Channel availability can include free-to-air services, encrypted packages and regional feeds. For a full scan, use the satellite and channel tools on DishTuner satellites and DishTuner channels.
Popular Channel Categories
The DishTuner database focuses on practical receiver data: channel names, frequencies, symbol rates, countries, languages and encryption status. Because category labels are not always available in imported satellite data, use language, country and free-to-air filters to narrow the list to the services most relevant to your setup.
Channel List on SES 10
The table below shows a representative channel sample for SES 10. The complete channel lineup may be longer and can change when providers update frequencies or encryption status.
| Channel | Frequency | Polarity | Symbol Rate | Language | Access |
|---|---|---|---|---|---|
| Canal Futura | 11480 | V | 30000 | Por | FTA / Clear |
Transponder List of SES 10
Receiver tuning depends on accurate transponder values. The following sample includes frequencies and symbol rates currently stored for SES 10. Always rescan from the latest receiver list when services move or providers update multiplexes.
| Frequency | Polarization | Symbol Rate | Beam |
|---|---|---|---|
| 11480 | V | 30000 | Brazil |
| 12033 | V | 4800 | Hispanic South America |
| 12043 | V | 4400 | Hispanic South America |
| 12049 | V | 6510 | Hispanic South America |
| 12060 | V | 4390 | Hispanic South America |
| 12091 | V | 4900 | Hispanic South America |
| 12103 | V | 5000 | Hispanic South America |
| 12130 | V | 4000 | Hispanic South America |
| 12177 | V | 5000 | Hispanic South America |
Languages Available on SES 10
The language data currently associated with SES 10 includes Por. Audio language metadata can vary by channel and transponder, especially where a service carries multiple audio tracks.
Main Languages
Main language labels for SES 10 currently include Por. If a channel carries several audio tracks, your receiver may show more language options after scanning.
Free-to-Air Channels on SES 10
DishTuner marks 1 channel-transponder rows for SES 10 as free-to-air or clear where the database provides that status. Free-to-air availability can change, so scan the latest frequencies and verify whether your receiver identifies each service as clear or encrypted.
Encrypted and Paid Channels
The database also contains 0 encrypted channel-transponder rows for SES 10. Encrypted services usually require a valid subscription, compatible receiver or provider-approved module, depending on the platform.
How to Tune SES 10
Start by selecting SES 10 in your receiver, then enter one known frequency, polarization and symbol rate from the transponder list. After locking signal, run a blind scan or network scan if your receiver supports it. For dish pointing, DishTuner can help calculate azimuth, elevation and LNB skew for your location using the dish alignment tool.
Why Use DishTuner for SES 10?
DishTuner keeps satellite, transponder and channel information in one place so you can move from research to setup quickly. You can browse satellites, compare frequencies, check channel countries and use alignment angles before making physical dish adjustments.
Related Satellites
- NSS 9 177.0°W
- Intelsat 18 180.0°E
- Eutelsat 172B 172.0°E
- Intelsat 19 166.0°E
- Optus D3 156.0°E
- JCSAT 2B 154.0°E
Frequently Asked Questions
What is SES 10 used for?
SES 10 is used for satellite TV and radio distribution, data services or regional feeds where the current database lists active channels and transponders.
Which countries are covered by SES 10?
Country links currently associated with SES 10 include Brazil, but actual reception depends on beam coverage, dish size and local setup.
How can I find channels on SES 10?
Use the channel list and transponder sample on this page, then scan the latest frequencies on your receiver. DishTuner currently lists 1 unique channels for SES 10.
Does SES 10 have free-to-air channels?
Some rows for SES 10 are marked as free-to-air or clear in the database. Use the latest transponder values and confirm the result with your own receiver scan.
What information do I need to tune SES 10?
You need the satellite position, dish pointing angles, frequency, polarization and symbol rate. DishTuner can help with the alignment values and receiver tuning data.
Conclusion
SES 10 at 67.0°W is part of the DishTuner satellite database with useful channel, frequency, coverage and tuning information. Use this page as a starting point, then confirm final reception with the latest scan from your receiver and local dish setup.